Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Drill with bits
Step-by-Step Installation
- Prepare Installation Space: Ensure cabinet opening is 24-inch width with proper clearance for water and drain connections.
- Remove Shipping Materials: Remove all protective films, shipping brackets, and packaging materials from the dishwasher.
- Connect Water Supply: Connect cold water supply line to the water inlet valve using approved dishwasher connector.
- Connect Drain Hose: Route the drain hose to drain connection with high loop to prevent backflow into dishwasher.
- Electrical Connection: Connect to a dedicated 120V, 60Hz, 15A circuit. Hardwired connection required.
- Level the Dishwasher: Adjust leveling legs to ensure dishwasher is level from front to back and side to side.
- Secure to Countertop: Use mounting brackets to secure dishwasher to underside of countertop.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Number | SHP95CM5N |
| Series | 500 Series |
| Type | Built-in Dishwasher |
| Color | Stainless Steel |
| Place Settings | 16 Place Settings |
| Noise Level | 44 dBA |
| Control Type | Hidden Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle (Normal) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 33.875 x 23.5625 x 24.5 inches |
| Weight | 105 lbs |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on EcoSilence Drive Motor
- Tub Warranty: Limited lifetime warranty on stainless steel tub
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com
Key Features
EcoSilence Drive
Bosch's brushless motor technology provides ultra-quiet operation at only 44 dBA, along with energy efficiency and long-lasting reliability.
PerfectDry
Advanced drying system uses mineral technology to naturally absorb moisture, delivering perfectly dry results for all dish types including plastics.
FlexSpace Tines
Adjustable upper rack tines fold down to create extra space for oversized items like pots, pans, and serving platters.
InfoLight
Projects a red light onto the floor to indicate when the dishwasher is running, eliminating the need to open the door to check cycle status.
3rd Rack
Extra rack designed specifically for cutlery and utensils, freeing up space in the main racks for plates and bowls.
Sanitize Option
Heats water to 162°F to eliminate 99.9% of food soil bacteria, meeting NSF standards for sanitation.
Wash Programs Explained
Auto
Automatically adjusts water temperature and cycle time based on soil level for optimal cleaning and energy efficiency
Heavy
Intensive cleaning for pots, pans, and heavily soiled dishes with extra hot water and extended wash time
Normal
Standard cycle for everyday dishes with normal soil levels, providing thorough cleaning with energy efficiency
Speed60
Quick cycle that washes and dries dishes in just 60 minutes for lightly soiled loads
Rinse & Hold
Rinses dishes to prevent dried-on food until a full load is ready for washing
Crystal
Gentle cycle for delicate glassware and china with lower water temperature and pressure
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly | Check circuit breaker, ensure door is latched completely |
| Poor cleaning results | Overloading, wrong detergent, incorrect program | Reduce load size, use correct detergent, select appropriate program |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in spray arms, unbalanced load | Check for foreign objects, redistribute load evenly |
| Dishes not drying | Rinse aid empty, plastic items, incorrect cycle | Refill rinse aid, use PerfectDry cycle, separate plastic items |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Water leakage detected - Check for leaks and water supply
- E09: Motor issue - Contact service center
- E15: Temperature sensor issue - Contact service center
- E24: Door not closed properly - Ensure door is fully closed
Manual Downloads
Current Model Manuals
SHP95CM5N
500 Series 44 dBA Dishwasher
SHP87CM5N
500 Series 42 dBA Dishwasher
SHP65CM5N
500 Series 46 dBA Dishwasher
SHP78CM5N
500 Series with CrystalDry
Popular Previous Models
SHP865ZD5N
500 Series 42 dBA Dishwasher
SHP68CM5N
500 Series 44 dBA Dishwasher
SHP53CM5N
500 Series 46 dBA Dishwasher
SHP88ZM5N
500 Series with Bar Handle