Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe cutter
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply, drain, and electrical connections in your kitchen cabinetry.
- Remove Packaging Materials: Remove all protective films and shipping materials from the dishwasher.
- Connect Water Supply: Connect the water inlet hose to the hot water supply line using the provided connectors.
- Connect Drain Hose: Route the drain hose to the sink drain or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz outlet. Ensure dedicated circuit if required.
- Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is level from front to back and side to side.
- Secure to Countertop: Use the mounting brackets to secure the dishwasher to the underside of the countertop.
- Test Run: Run the dishwasher through a short cycle to check for leaks and proper operation.
Specifications
Model Series | SMS6ECI00E |
Type | Built-in Dishwasher |
Color | Stainless Steel |
Place Settings | 14 Place Settings |
Noise Level | 44 dB |
Control Type | Electronic Touch Controls with Display |
Energy Rating | A+++ (Most Efficient) |
Water Consumption | 9.5 Liters per cycle |
Power Requirements | 230V, 50Hz, 10A |
Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
Weight | 48.5 kg |
Drying System | Zeolith® Mineral Drying |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoDirect Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com
Key Features
EcoDirect Motor
Bosch's brushless EcoDirect motor provides efficient and quiet operation with direct drive technology for enhanced reliability and energy savings.
Zeolith® Drying
Advanced mineral drying system uses natural zeolite minerals to absorb moisture and release heat, providing excellent drying results with minimal energy consumption.
AquaStop Plus
Complete water protection system with double safety features to prevent leaks and flooding, including automatic shut-off in case of hose damage.
InfoLight®
Projects a red light onto the floor to indicate when the dishwasher is running, providing clear status information without opening the door.
Home Connect
Wi-Fi enabled for remote control via smartphone app, allowing you to start cycles, monitor progress, and receive notifications when cleaning is complete.
VarioSpeed Plus
Reduces cycle time by up to 60% while maintaining excellent cleaning results, perfect for when you need dishes cleaned quickly.
Wash Programs Explained
Auto
Automatically detects soil level and adjusts water temperature and cycle time for optimal cleaning
Intensive
Heavy-duty cycle for pots, pans, and heavily soiled dishes with higher temperature and extended wash time
Eco
Energy-efficient cycle that uses less water and electricity while providing excellent cleaning results
Quick
Fast 30-minute cycle for lightly soiled dishes that need to be cleaned quickly
Glass
Gentle cycle for delicate glassware and crystal with lower temperature and careful water distribution
Rinse
Quick rinse cycle to prevent food from drying on dishes before running a full wash cycle
Troubleshooting
Problem | Possible Cause | Solution |
---|---|---|
Dishwasher won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
Poor cleaning results | Overloading, wrong detergent, incorrect program | Reduce load size, use correct detergent, select appropriate program |
Water not draining | Drain hose clogged or filter blocked | Check drain hose for obstructions, clean filter system |
Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
Unusual noises | Foreign objects in spray arms, unbalanced load | Check spray arms for obstructions, redistribute load evenly |
Dishes not drying | Rinse aid empty, wrong program selected | Refill rinse aid, select program with drying function |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Water leakage detected - Check for leaks and AquaStop system
- E09: Motor issue - Contact service center
- E15: Temperature sensor error - Contact service center
- E24: Door not closed properly - Ensure door is fully closed
Manual Downloads
Current Model Manuals
SMS6ECI00E
Series 6 14 Place Settings
SMS8ECI00E
Series 8 16 Place Settings
SMS4ECI00E
Series 4 13 Place Settings
SMS2ECI00E
Series 2 12 Place Settings
Popular Previous Models
SMS88TW00E
Series 8 Stainless Steel
SMS68TW00E
Series 6 White
SMS50E32GC
Series 5 Black
SMS25AW00G
Series 2 Integrated