Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Drill
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply, drain, and electrical connections with proper ventilation.
- Remove Packaging Materials: Remove all shipping materials and protective films from the dishwasher interior and exterior.
- Connect Water Supply: Connect cold water supply line to the water inlet valve using new hoses and ensure tight connections.
- Connect Drain Hose: Route the drain hose to the sink drain or garbage disposal with proper high loop installation.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, dedicated circuit outlet. Do not use extension cords.
- Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is perfectly level for optimal performance.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation before regular use.
Specifications
| Model Series | SMS68TX02E |
| Type | Built-in Dishwasher |
| Color | Stainless Steel |
| Capacity | 14 Place Settings |
| Noise Level | 44 dB |
| Control Type | Hidden Touch Controls with LED Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9.5 Liters per cycle |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
| Weight | 48.5 kg |
| Drying System | Zeolith® Mineral Drying |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoDirect Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com
Key Features
Zeolith® Drying Technology
Bosch's innovative Zeolith mineral drying system uses natural minerals to absorb moisture and release heat, providing superior drying results with energy efficiency.
EcoDirect Motor
The brushless EcoDirect motor provides powerful and efficient cleaning while operating quietly and consuming less energy than conventional motors.
PerfectDry Sensor
Advanced sensor technology automatically detects the load size and soil level to optimize water temperature and cycle duration for perfect results every time.
AquaStop Protection
Complete water protection system with double-walled hoses and leak sensors to prevent water damage and provide peace of mind.
Home Connect
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts.
VarioSpeed Plus
This feature reduces cycle time by up to 60% without compromising cleaning performance, using optimized water temperature and spray pressure.
Wash Programs Explained
Auto
Automatically adjusts water temperature and cycle time based on soil level detection
Eco
Energy-efficient program for normally soiled dishes with extended cycle time
Intensive
High-temperature program for heavily soiled pots, pans, and baking dishes
Glass
Gentle program for delicate glassware and crystal with lower temperature
Speed 60
Quick program for lightly soiled dishes completed in just 60 minutes
Night
Extra quiet operation with reduced noise level for overnight cleaning
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly, child lock activated | Check power supply, ensure door is latched completely, deactivate child lock |
| Poor cleaning results | Overloading, wrong detergent, incorrect program selection | Reduce load size, use correct detergent, select appropriate program |
| Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions, clean filter system |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in spray arms, unbalanced load | Check spray arms for obstructions, redistribute dishes evenly |
| Dishes not drying properly | Rinse aid empty, wrong program selection, overloading | Refill rinse aid, select drying program, reduce load size |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Water leakage detected - Check for leaks and water supply
- E04: Motor issue - Contact service center
- E05: Door not closed properly - Ensure door is fully closed
- E06: Temperature sensor error - Contact service center
Manual Downloads
Current Model Manuals
SMS68TX02E
Series 6 14 Place Settings
SMS88TI01E
Series 8 16 Place Settings
SMS46JI01E
Series 4 13 Place Settings
SMS25AW01E
Series 2 12 Place Settings
Popular Previous Models
SMS50E32GC
500 Series 14 Place Settings
SMS63L08GC
300 Series 13 Place Settings
SMS24AW00G
100 Series 12 Place Settings
SMS88TW01G
800 Series 16 Place Settings