Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Drill with bits
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply, drain, and electrical connections with adequate ventilation.
- Remove Packaging Materials: Remove all shipping materials, protective films, and transit bolts from the dishwasher.
- Connect Water Supply: Connect cold water supply line to the water inlet valve using approved dishwasher connection kit.
- Connect Drain Hose: Install drain hose with high loop to prevent backflow into the dishwasher. Ensure proper slope for drainage.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
- Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is perfectly level from front to back and side to side.
- Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | SHS53CM5N |
| Type | Built-in Dishwasher |
| Color | Stainless Steel |
| Capacity | 15 Place Settings |
| Noise Level | 44 dB |
| Control Type | Hidden Touch Controls with LED Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9.5 L per cycle (Eco Program) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
| Weight | 48 kg |
| Drying System | Zeolith® Mineral Drying |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoDirect Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com
Key Features
EcoDirect Motor
Bosch's brushless EcoDirect motor provides efficient and quiet operation with direct drive technology for enhanced reliability and energy savings.
Zeolith® Drying
Revolutionary mineral drying system uses natural zeolite minerals to absorb moisture and release heat, providing excellent drying results with minimal energy consumption.
InfoLight®
Projects a red light onto the floor to indicate the dishwasher is running, allowing you to check cycle status without opening the door.
AquaStop® Plus
Complete water protection system with double-layered hose and leak sensor that automatically shuts off water supply in case of leakage.
Home Connect
Wi-Fi enabled for remote control via smartphone app, allowing you to start cycles, monitor progress, and receive maintenance alerts.
Rackmatic®
Adjustable upper rack with 9 different height settings to accommodate tall items and optimize loading space.
Wash Programs Explained
Auto Program
Automatically detects soil level and adjusts water temperature and cycle time for optimal cleaning and energy efficiency.
Eco Program
Energy-efficient program that provides excellent cleaning results while minimizing water and energy consumption.
Intensive Program
High-temperature program for heavily soiled pots, pans, and baking dishes with stubborn, dried-on food residues.
Quick Program
Fast 60-minute cycle for lightly soiled dishes that need to be cleaned quickly.
Glass Program
Gentle low-temperature program specifically designed for delicate glassware and crystal.
Rinse Program
Quick rinse cycle to prevent food from drying on dishes when running a full load later.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor cleaning results | Overloading, wrong detergent, incorrect program | Reduce load size, use correct detergent, select appropriate program |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in spray arms, unbalanced load | Check spray arms for obstructions, redistribute load evenly |
| Poor drying results | Rinse aid empty, wrong program selection | Refill rinse aid, use programs with drying function |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Water leakage detected - Check for leaks and water supply
- E04: Motor issue - Contact service center
- E05: Door not closed properly - Ensure door is fully closed
- E06: Temperature sensor issue - Contact service center
Manual Downloads
Current Model Manuals
SHS53CM5N
15 Place Settings Dishwasher
SHS53CM3N
15 Place Settings Dishwasher
SHS53AM5N
15 Place Settings with Home Connect
SHS53AM3N
15 Place Settings Stainless Steel
Popular Previous Models
SHS50C55UC
14 Place Settings Dishwasher
SHS63VL5UC
16 Place Settings Dishwasher
SMS53WL2UC
14 Place Settings White
SMS88CI05U
16 Place Settings with CrystalDry