Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe cutter
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply, drain, and electrical connections with adequate ventilation.
- Remove Packaging Materials: Remove all shipping materials and protective films from the dishwasher.
- Connect Water Supply: Connect cold water supply line to the water inlet valve using approved connection kit.
- Connect Drain Hose: Route the drain hose to sink drain or garbage disposal with proper air gap installation.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, dedicated circuit outlet.
- Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is perfectly level.
- Secure to Countertop: Mount the dishwasher securely to the underside of the countertop.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | SMV4HVXOOg |
| Type | Built-in Dishwasher |
| Color | Stainless Steel |
| Capacity | 14 Place Settings |
| Noise Level | 44 dB |
| Control Type | Electronic Touch Controls with Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9.5 Liters per cycle |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
| Weight | 48.5 kg |
| Drying System | Zeolith® / Heat Exchanger |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoSilence Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com
Key Features
EcoSilence Drive
Brushless motor technology that ensures quiet operation (44 dB) with enhanced reliability and energy efficiency for long-lasting performance.
Zeolith® Drying
Advanced mineral-based drying system that uses natural minerals to absorb moisture and release heat, providing excellent drying results with energy efficiency.
VarioSpeed Plus
Reduces cycle time by up to 50% while maintaining excellent cleaning performance, perfect for when you need dishes cleaned quickly.
AquaSensor
Intelligent water sensor that automatically detects how dirty the water is and adjusts water usage accordingly, saving water and energy.
InfoLight
Projects a red light onto the floor to indicate when the dishwasher is running, providing visual status without opening the door.
Rackmatic® System
Adjustable upper rack that can be raised or lowered to accommodate taller items in both racks, providing maximum loading flexibility.
Wash Programs Explained
Auto
Automatically selects optimal program based on soil level detected by AquaSensor
Eco 50°C
Energy-efficient program for normally soiled dishes, perfect for daily use
Intensive 70°C
High-temperature program for heavily soiled pots, pans, and baking dishes
Quick 45°C
Fast program for lightly soiled dishes, completed in under 30 minutes
Glass 40°C
Gentle program for crystal and delicate glassware with special protection
Rinse
Short rinse cycle for dishes that will be washed later or light rinsing
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly, child lock activated | Check power supply, ensure door is latched completely, check child lock |
| Poor cleaning results | Overloading, wrong detergent, incorrect program selection | Reduce load size, use recommended detergent, select appropriate program |
| Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions, clean filter system |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Spray arm obstruction, foreign objects in pump | Check spray arms rotate freely, remove any foreign objects |
| Poor drying results | Rinse aid empty, incorrect loading, selected program | Refill rinse aid, ensure proper loading, select drying-intensive program |
Error Codes
- E01 / E02: Water supply issue - Check water supply and inlet valve
- E03 / E04: Drain issue - Check drain hose and pump
- E09: Water leakage detected - Check for leaks and water supply
- E15 / E16: Heating system issue - Contact service center
- E21 / E22: Temperature sensor issue - Contact service center
- E24: Door not closed properly - Ensure door is fully closed
Manual Downloads
Current Model Manuals
SMV4HVXOOg
Series 4 14 Place Settings
SMV6ZCXO6g
Series 6 16 Place Settings
SMV8ZCXO6g
Series 8 16 Place Settings
SMV2IKX1Eg
Series 2 13 Place Settings
Popular Previous Models
SMS6ZCI00E
Series 6 15 Place Settings
SMS8ZCI00E
Series 8 15 Place Settings
SMS4HVI00E
Series 4 13 Place Settings
SMS2HVI00E
Series 2 12 Place Settings