Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply, drain, and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and ensure proper sealing.
- Connect Drain Hose: Route the drain hose into sink drain or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Ensure dedicated circuit if required.
- Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is level from front to back and side to side.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
Model Number | SHEM63W55N |
Type | Built-in Dishwasher |
Color | Stainless Steel / White |
Place Settings | 15 Place Settings |
Noise Level | 44 dB |
Control Type | Electronic Touch Controls with Display |
Energy Rating | A+++ (Most Efficient) |
Water Consumption | 9.5 Liters per cycle |
Power Requirements | 230V, 50Hz, 10A |
Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
Weight | 48 kg |
Drying System | Zeolith® Mineral Drying |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoSilence Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com
Key Features
EcoSilence Drive
Bosch's innovative brushless motor provides ultra-quiet operation at only 44 dB, ensuring peaceful kitchen environment with exceptional reliability and energy efficiency.
Zeolith® Drying
Advanced mineral drying technology uses natural zeolite minerals to absorb moisture and release heat, resulting in perfectly dry dishes with no additional energy consumption.
PerfectDry
Intelligent drying system automatically adjusts drying time and temperature based on load size and soil level, ensuring optimal drying performance for all dish types.
AquaStop
Complete water protection system with double-layered hoses and leak sensors that automatically shut off water supply in case of leaks, providing 100% protection against water damage.
Home Connect
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts.
SpeedPerfect
This feature reduces cycle time by up to 60% without compromising cleaning performance, perfect for when you need clean dishes quickly.
Wash Programs Explained
Auto
Intelligent program that automatically detects soil level and adjusts water temperature and cycle time accordingly
Eco
Energy-efficient program that provides excellent cleaning results with minimal water and energy consumption
Intensive
Powerful cleaning action for heavily soiled pots, pans, and baking dishes with high temperature
Glass
Gentle program specifically designed for delicate glassware and crystal at lower temperature
Speed60
Quick program that washes and dries normally soiled dishes in just 60 minutes
Rinse
Short rinse cycle for lightly soiled items or to prevent food from drying on dishes
Troubleshooting
Problem | Possible Cause | Solution |
---|---|---|
Dishwasher won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
Poor cleaning results | Overloading, wrong detergent, incorrect program | Reduce load size, use correct detergent, select appropriate program |
Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
Unusual noises | Foreign objects in spray arms, unbalanced load | Check for foreign objects, redistribute dishes evenly |
Dishes not drying | Rinse aid empty, wrong program selected | Refill rinse aid, select program with drying function |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Water leakage detected - Check for leaks and water supply
- E04: Motor issue - Contact service center
- E05: Door not closed properly - Ensure door is fully closed
- E06: Temperature sensor issue - Contact service center
Manual Downloads
Current Model Manuals
SHEM63W55N
15 Place Settings Dishwasher
SHEM63W56N
15 Place Settings with Home Connect
SHEM63W54N
15 Place Settings Basic Model
SHEM63W55W
15 Place Settings White
Popular Previous Models
SHEM63W48N
14 Place Settings Dishwasher
SHEM63W44N
13 Place Settings with Zeolith
SHEM63W42N
12 Place Settings Eco Model
SHEM63W40N
12 Place Settings Basic