Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Drill
Step-by-Step Installation
- Prepare Installation Space: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing access.
- Remove Shipping Materials: Remove all protective films, shipping bolts, and packaging materials from the dishwasher.
- Connect Water Supply: Connect cold water supply line to the water inlet valve using new hoses and proper fittings.
- Connect Drain Hose: Route the drain hose to the sink drain or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Dedicated circuit recommended.
- Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is level from front to back and side to side.
- Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Number | SHP78CM5N |
| Type | Built-in Dishwasher |
| Color | Stainless Steel |
| Place Settings | 16 Place Settings |
| Noise Level | 42 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9.5 Liters per cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
| Weight | 48 kg |
| Drying System | Zeolith® Mineral Drying |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoSilence Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com
Key Features
EcoSilence Drive
Bosch's brushless EcoSilence Drive motor provides extremely quiet operation (42 dB) with exceptional reliability and energy efficiency.
Zeolith® Drying
Revolutionary mineral drying system uses natural zeolith minerals to absorb moisture and release heat, providing excellent drying results with low energy consumption.
PerfectDry
Advanced drying technology that automatically adjusts temperature and time based on load size and soil level for optimal drying performance.
InfoLight
Projects a red light onto the floor to indicate the dishwasher is running, making it easy to check cycle status without opening the door.
Home Connect
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts.
AquaStop
Complete protection against water damage with double-walled hoses and automatic leak detection that shuts off water supply if a leak is detected.
Wash Programs Explained
Auto
Automatically detects soil level and adjusts water temperature and cycle time for optimal cleaning
Intensive
High-temperature program for heavily soiled pots, pans, and baking dishes
Eco
Energy-efficient program for normally soiled dishes with lower water and energy consumption
Quick
Fast 30-minute program for lightly soiled dishes that need quick cleaning
Glass
Gentle program for delicate glassware and crystal with lower temperature and reduced spray pressure
Rinse
Quick rinse cycle to prevent food from drying on dishes before running a full cycle
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor cleaning results | Overloading, wrong detergent, incorrect program | Reduce load size, use correct detergent, select appropriate program |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in spray arms, improper loading | Check for foreign objects, reload dishes properly |
| Poor drying results | Rinse aid empty, wrong program selected | Refill rinse aid, select program with drying function |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Water leakage detected - Check for leaks and water supply
- E04: Motor issue - Contact service center
- E05: Door not closed properly - Ensure door is fully closed
- E09: Temperature sensor issue - Contact service center
Manual Downloads
Current Model Manuals
SHP78CM5N
Built-in Dishwasher with Zeolith
SHP75CM5N
Built-in Dishwasher with Home Connect
SHP73CM5N
Built-in Dishwasher with PerfectDry
SHP71CM5N
Built-in Dishwasher with EcoSilence
Popular Previous Models
SHP68CM5N
Built-in Dishwasher 16 Place
SHP65CM5N
Built-in Dishwasher with Auto
SHP63CM5N
Built-in Dishwasher with InfoLight
SHP61CM5N
Built-in Dishwasher with AquaStop