Dimensions
| Overall Height | 815 mm |
| Overall Width | 598 mm |
| Overall Depth | 550 mm |
| Installation Height | 815 - 850 mm (adjustable) |
| Installation Width | 560 mm |
| Installation Depth | 550 mm |
| Door Opening Angle | 90° |
| Weight | 32.5 kg |
Clearance Requirements
- Side Clearance: Minimum 5 mm on each side
- Rear Clearance: Minimum 10 mm from back wall
- Top Clearance: Minimum 20 mm for ventilation
- Door Clearance: Minimum 600 mm in front for full opening
Installation Requirements
Tools Needed:
- Spirit level
- Adjustable wrench
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Drill with appropriate bits
Step-by-Step Installation
- Prepare Cabinet Opening: Ensure cabinet opening meets required dimensions and is square and level.
- Check Plumbing: Verify water supply and drain connections are accessible and compatible.
- Electrical Connection: Connect to a properly grounded 230V, 50Hz outlet with 10A fuse protection.
- Water Connection: Connect cold water supply (max pressure 1 MPa, min pressure 0.03 MPa).
- Drain Connection: Connect drain hose with minimum height of 400 mm and maximum of 1000 mm.
- Position Dishwasher: Carefully slide dishwasher into cabinet opening, ensuring no kinks in hoses.
- Level and Secure: Adjust leveling feet and secure dishwasher to adjacent cabinets.
- Test Operation: Run initial test cycle to check for leaks and proper operation.
Warning: Installation must be performed by qualified personnel. Incorrect installation may void warranty.
Technical Specifications
| Model Number | SMH4HVX31E |
| Type | Built-in Dishwasher |
| Color | Stainless Steel |
| Place Settings | 14 place settings |
| Energy Rating | A+++ |
| Water Consumption | 9.5 liters per cycle (Eco program) |
| Power Consumption | 0.77 kWh per cycle (Eco program) |
| Noise Level | 44 dB |
| Programs | 6 programs including Eco, Intensive, Auto |
| Drying System | Zeolith® mineral drying |
| Water Pressure | 0.03 - 1 MPa |
| Power Requirements | 230-240V, 50Hz, 10A |
Warranty Information
- Full Warranty: 2 years parts and labor
- Extended Warranty: 5 years on motor and electronic controls
- Additional Coverage: Optional premium care package available
Cutout Dimensions
| Cabinet Opening Width | 560 mm |
| Cabinet Opening Height | 820 - 850 mm |
| Cabinet Opening Depth | Minimum 550 mm |
| Worktop Height | 850 mm (standard) |
| Kickplate Height | 100 - 150 mm |
| Service Gap | Minimum 20 mm at rear |
Connection Requirements
- Water Inlet: 3/4" connection, cold water only
- Drain Outlet: Standard dishwasher drain connection
- Electrical: 230V socket within 1.5 meters
- Ventilation: Minimum 20 mm clearance above unit
Important: Always verify dimensions before cabinet construction or modification.
Document Downloads
SMH4HVX31E Documents
Installation Manual
Complete installation guide
User Manual
Operating instructions
Technical Specifications
Detailed technical data
Energy Label
Energy efficiency information
Related Models
SMH4HVX30E
Similar model specifications
SMH4HVX32E
Advanced version
SMH4HVX25E
Previous generation
SMH4HVX28E
Compact version
Note: For additional documentation or model variations, please visit the Bosch Support Website.