Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe cutter
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply, drain, and electrical connections with adequate ventilation.
- Remove Packaging Materials: Remove all protective films and shipping materials from the dishwasher.
- Connect Water Supply: Connect cold water supply line to the water inlet valve using approved connection kit.
- Connect Drain Hose: Route the drain hose into sink waste pipe or standpipe with proper height to prevent backflow.
- Electrical Connection: Connect to a properly grounded 230V, 50Hz outlet. Ensure proper earthing.
- Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is perfectly level.
- Test Run: Run the dishwasher through a short cycle to check for leaks and proper operation.
Specifications
| Model Number | SMV40C30GB |
| Type | Built-in Dishwasher |
| Color | Stainless Steel |
| Capacity | 14 Place Settings |
| Noise Level | 44 dB |
| Control Type | Electronic Touch Controls with Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9.5 L per cycle (Eco program) |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
| Weight | 48 kg |
| Drying System | Zeolith® Mineral Drying |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoSilence Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 0344 892 8979 or visit Bosch-home.co.uk
Key Features
EcoSilence Drive
Brushless motor technology that ensures quiet operation (44 dB) with enhanced reliability and energy efficiency for long-lasting performance.
Zeolith® Drying
Natural mineral drying system that uses the power of zeolite minerals to absorb moisture and release heat, providing excellent drying results with energy efficiency.
VarioSpeed Plus
Reduces washing time by up to 50% while maintaining excellent cleaning results, perfect for when you need clean dishes in a hurry.
AquaSensor
Intelligent water sensor that automatically detects how dirty the water is and adjusts the water usage and cycle time accordingly for optimal efficiency.
Home Connect
Wi-Fi enabled for remote control via smartphone app, allowing you to start cycles, monitor progress, and receive notifications when your dishes are clean.
InfoLight
Projects a red light onto the floor to show when the dishwasher is running, so you never have to open the door to check if the cycle has finished.
Wash Programs Explained
Auto
Automatically selects the optimal program based on soil level detected by AquaSensor
Eco
Energy-efficient program for normally soiled dishes, perfect for daily use
Intensive
Powerful cleaning for heavily soiled pots, pans, and baking dishes
Glass
Gentle program for delicate glassware and crystal at low temperature
SpeedPerfect
Quick wash program that cleans lightly soiled dishes in under 30 minutes
Rinse
Quick rinse cycle to prevent food residue from drying on dishes
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly, child lock activated | Check power supply, ensure door is latched completely, check child lock |
| Poor cleaning results | Overloading, wrong detergent, incorrect program selection | Reduce load size, use correct detergent, select appropriate program | Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions, clean filter system |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Spray arm hitting dishes, foreign objects in pump | Rearrange dishes properly, check for foreign objects |
| Dishes not drying | Rinse aid empty, wrong program selected, overloaded | Refill rinse aid, select program with drying, reduce load size |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Water leakage detected - Check for leaks and water supply
- E09: Motor issue - Contact service center
- E15: Door not closed properly - Ensure door is fully closed
- E24: Temperature sensor issue - Contact service center
Manual Downloads
Current Model Manuals
SMV40C30GB
14 Place Settings Dishwasher
SMV46IX01G
14 Place Settings with Home Connect
SMV25AX01G
12 Place Settings Dishwasher
SMV69TX01G
16 Place Settings Premium
Popular Previous Models
SMV50C30GB
13 Place Settings Dishwasher
SMV59T30GB
14 Place Settings with Zeolith
SMV68TD06G
15 Place Settings Premium
SMV88TD06G
16 Place Settings with AutoOpen