Installation Guide
Tools Needed:
- Adjustable wrench
- Bucket or towel
- Teflon tape
- Screwdriver set
- Pliers
Step-by-Step Installation
- Shut Off Water Supply: Turn off the main water supply to the dishwasher and disconnect power.
- Drain Existing Water: Place a bucket or towel under the connection points to catch any residual water.
- Remove Old Filter: Unscrew the existing water inlet connection and remove any old filtration components.
- Install New Filter: Position the Bosch water filter in the water line, ensuring proper flow direction.
- Connect Water Lines: Use Teflon tape on threaded connections and secure all water line fittings.
- Check for Leaks: Slowly turn water supply back on and check all connections for leaks.
- Test Operation: Restore power and run a short rinse cycle to ensure proper water flow and filtration.
Specifications
| Filter Type | Sediment & Carbon Filtration |
| Compatibility | All Bosch Dishwasher Models |
| Filter Life | 6 months or 1,000 cycles |
| Flow Rate | 2.5 GPM (Gallons Per Minute) |
| Maximum Pressure | 125 PSI |
| Temperature Range | 40°F - 100°F (4°C - 38°C) |
| Connection Size | 1/2" NPT |
| Dimensions | 4.5 x 2.5 x 2.5 inches |
| Weight | 0.8 lbs |
| Certifications | NSF/ANSI 42 & 53 Certified |
Warranty Information
- Filter Warranty: 1 year limited warranty
- Performance Guarantee: 90-day satisfaction guarantee
- Support: Lifetime technical support
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-Home.com
Key Features
Advanced Sediment Filtration
Removes sand, silt, rust, and other particulates down to 5 microns, protecting your dishwasher from debris damage.
Carbon Block Technology
Reduces chlorine, bad tastes, and odors from water, ensuring cleaner, fresher-smelling dishes after each cycle.
Scale Prevention
Helps prevent limescale buildup in heating elements and spray arms, extending appliance lifespan.
Easy Replacement Design
Quick-connect fittings and clear housing make filter changes simple without professional assistance.
Water Quality Indicator
Built-in indicator shows when filter replacement is needed based on water usage and time.
Eco-Friendly Performance
Maintains optimal water pressure while reducing mineral content for more efficient cleaning cycles.
Filtration Technology Explained
Sediment Removal
Multi-layer filtration captures particles as small as 5 microns
Chlorine Reduction
Activated carbon blocks reduce chlorine by up to 99%
Scale Inhibition
Special media helps prevent calcium and magnesium buildup
Flow Optimization
Maintains consistent water pressure for optimal cleaning
Contaminant Reduction
Reduces heavy metals and organic compounds
Water Softening
Helps reduce water hardness for spot-free drying
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Reduced water flow | Clogged filter, low water pressure | Replace filter, check home water pressure |
| Water leaking | Loose connections, damaged O-rings | Tighten connections, replace O-rings |
| Poor cleaning results | Expired filter, incorrect installation | Replace filter, verify installation direction |
| Filter indicator light on | Filter needs replacement | Replace water filter cartridge |
| Unusual noises | Air in system, restricted flow | Bleed air from system, check for kinks |
| No water to dishwasher | Filter blockage, valve issues | Replace filter, check inlet valve |
Maintenance Schedule
- Every 6 Months: Replace filter cartridge
- Monthly: Check for leaks and proper connections
- Quarterly: Inspect O-rings and housing
- Annually: Complete system flush and inspection
Manual Downloads
Current Filter Models
BOS-FILTER-001
Standard Sediment Filter
BOS-FILTER-002
Advanced Carbon Filter
BOS-FILTER-003
Premium Combo Filter
BOS-FILTER-004
Scale Inhibition Filter
Compatible Dishwasher Series
800 Series
Premium Dishwashers
500 Series
Mid-Range Dishwashers
300 Series
Entry-Level Dishwashers
Benchmark Series
Luxury Dishwashers