Bosch Exxcel Auto Option Dishwasher

User Manual & Installation Guide

Auto Program Detection

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure

Step-by-Step Installation

  1. Choose Installation Location: Select a location near kitchen plumbing and electrical connections on a solid, level floor.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses.
  4. Connect Drain Hose: Route the drain hose into the sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
  6. Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is level from front to back and side to side.
  7. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series SMS6ECI00E
Type Built-in Dishwasher
Color Stainless Steel
Place Settings 14 place settings
Noise Level 44 dB
Control Type Electronic Touch Controls with Display
Energy Rating A+++ (Most Efficient)
Water Consumption 9.5 L per cycle (Eco program)
Power Requirements 230V, 50Hz, 10A
Dimensions (HxWxD) 81.5 x 59.8 x 55 cm
Weight 48 kg
Drying System Zeolith® mineral drying

Warranty Information

  • Full Warranty: 2 years parts and labor
  • Motor Warranty: 10 years on EcoDirect Motor
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com

Key Features

Auto Program

Intelligent sensor system automatically detects soil level and adjusts water temperature, cycle time, and water usage for optimal cleaning results.

EcoDirect Motor

Brushless EcoDirect motor provides powerful and efficient water circulation while operating quietly and consuming less energy.

Zeolith® Drying

Advanced mineral drying system uses natural zeolite minerals to absorb moisture and release heat, providing excellent drying results with energy efficiency.

VarioSpeed Plus

Reduces cycle time by up to 50% while maintaining excellent cleaning performance through optimized water pressure and temperature.

InfoLight

Projects a red light onto the floor to indicate when the dishwasher is running, providing visual status indication without opening the door.

AquaStop

Complete water protection system with double-walled hoses and leak sensors that automatically shut off water supply in case of leakage.

Wash Programs Explained

Auto Program

Intelligent sensor automatically adjusts to soil level for optimal cleaning

Eco 50°C

Energy-efficient program for normally soiled dishes with low energy consumption

Intensive 70°C

High-temperature program for heavily soiled pots, pans, and baking dishes

Glass 40°C

Gentle program for glassware and delicate china with special protection

Speed 60

Quick program for lightly soiled dishes completed in just 60 minutes

Rinse & Hold

Rinses dishes to prevent drying of food residues until full load is ready

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, incorrect program Reduce load size, use correct detergent, select appropriate program
Water not draining Drain hose clogged or filter blocked Check drain hose for obstructions, clean filter system
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, unbalanced load Check for foreign objects, redistribute load evenly
Dishes not drying properly Rinse aid empty, wrong program selected Refill rinse aid, select program with drying function

Error Codes

  • E01: Water supply issue - Check water supply and inlet valve
  • E09: Drain issue - Check drain hose and pump
  • E15: Water leakage detected - Check for leaks and water supply
  • E21: Motor issue - Contact service center
  • E24: Door not closed properly - Ensure door is fully closed
  • E32: Temperature sensor error - Contact service center

Manual Downloads

Current Model Manuals

SMS6ECI00E

Exxcel Auto Option

SMS6ECI02E

Exxcel Auto Option Plus

SMS8ECI00E

Exxcel 8 Series Auto

SMS4ECI00E

Exxcel 4 Series Auto

Popular Previous Models

SMS50E32GC

500 Series Auto

SMS88TW00E

800 Series Auto

SMS25AW00G

300 Series Auto

SMS40D02GC

400 Series Auto

Note: For models not listed here, please visit the Bosch Support Website for complete documentation.