Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe cutter
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections with proper ventilation.
- Remove Packaging Materials: Remove all shipping materials and protective films from the dishwasher.
- Connect Water Supply: Connect cold water supply line to the water inlet valve. Use only new hoses and ensure proper sealing.
- Connect Drain Hose: Route the drain hose into sink drain or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Ensure dedicated circuit if required.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is perfectly level for optimal performance.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | SHP78CM5N |
| Type | Built-in Dishwasher |
| Color | Stainless Steel |
| Place Settings | 15 Place Settings |
| Noise Level | 42 dB |
| Control Type | Electronic Touch Controls with Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9.5 Liters per cycle |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
| Weight | 48.5 kg |
| Drying System | Zeolith® Mineral Drying |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoSilence Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com
Key Features
EcoSilence Drive
Bosch's innovative brushless motor provides extremely quiet operation at only 42 dB, equivalent to a quiet library environment.
Zeolith® Drying
Revolutionary mineral drying technology that uses natural minerals to absorb moisture and release heat, providing excellent drying results with energy efficiency.
AquaSensor
Intelligent water sensor automatically detects how dirty the water is and adjusts water usage accordingly, saving water and energy.
InfoLight
Projects a red light onto the floor to indicate the dishwasher is running, turning off when the cycle is complete.
VarioSpeed
Reduces cycle time by up to 50% while maintaining excellent cleaning performance for when you need dishes cleaned quickly.
Rackmatic
Upper rack can be adjusted to three different height positions to accommodate tall items in the lower rack.
Wash Programs Explained
Auto
Automatically selects optimal program based on soil level detected by AquaSensor
Intensive
Heavy-duty program for pots, pans, and heavily soiled dishes
Eco
Energy-efficient program that saves water and electricity while providing excellent cleaning
Quick
Fast 30-minute program for lightly soiled dishes that need quick cleaning
Glass
Gentle program specifically designed for delicate glassware and crystal
Rinse
Quick rinse cycle to prevent dried-on food until a full load is ready
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor cleaning results | Overloading, wrong detergent, incorrect program | Reduce load size, use correct detergent, select appropriate program |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in spray arms, unbalanced load | Check for foreign objects, ensure dishes are properly loaded |
| Dishes not drying | Rinse aid empty, wrong program selected | Refill rinse aid, select program with drying function |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Water leakage detected - Check for leaks and water supply
- E04: Motor issue - Contact service center
- E05: Door not closed properly - Ensure door is fully closed
- E09: Temperature sensor issue - Contact service center
Manual Downloads
Current Model Manuals
SHP78CM5N
15 Place Settings Dishwasher
SHP75CM5N
14 Place Settings Dishwasher
SHP87CM5N
16 Place Settings Dishwasher
SHP68CM5N
13 Place Settings Dishwasher
Popular Previous Models
SMS50E02GC
12 Place Settings
SMS53L12GC
13 Place Settings
SMS88TW01G
15 Place Settings
SMS25AW00G
10 Place Settings