Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections in a standard kitchen cabinet.
- Remove Packaging Materials: Remove all shipping materials and protective films from the dishwasher.
- Connect Water Supply: Connect the water supply line to the hot water inlet valve. Use only new hoses and ensure proper sealing.
- Connect Drain Hose: Route the drain hose to the sink drain or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Hardwiring may be required in some installations.
- Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is level from front to back and side to side.
- Secure Installation: Secure the dishwasher to the countertop or adjacent cabinets using mounting brackets.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | SHP878WD5N |
| Type | Built-in Dishwasher |
| Color | Stainless Steel |
| Place Settings | 16 Place Settings |
| Noise Level | 42 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9.5 Liters per cycle |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
| Weight | 48 kg |
| Drying System | Zeolith® Mineral Drying |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoSilence Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com
Key Features
EcoSilence Drive
Bosch's innovative brushless motor technology provides extremely quiet operation at only 42 dB, along with exceptional durability and energy efficiency.
Zeolith® Drying Technology
Revolutionary mineral drying system that uses natural zeolite minerals to absorb moisture and release heat, providing perfect drying results with no additional energy consumption.
PerfectDry
Advanced drying system that automatically adjusts the drying process based on load size and soil level, ensuring perfectly dry dishes every time.
Home Connect
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts.
AquaStop
Complete protection against water damage with double-layered hoses and electronic leak monitoring that automatically shuts off water supply in case of leaks.
InfoLight
Projects a red light onto the floor to indicate the dishwasher is running, making it easy to check status without opening the door.
Wash Programs Explained
Auto
Automatically detects soil level and adjusts water temperature and cycle time for optimal cleaning
Intensive
High-temperature program for heavily soiled pots, pans, and baking dishes
Eco
Energy-efficient program that uses less water and electricity while maintaining excellent cleaning results
Quick
Fast 30-minute cycle for lightly soiled dishes that need quick cleaning
Glass
Gentle program with lower temperature for delicate glassware and crystal
Half-Load
Efficient program for smaller loads that saves water and energy
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor cleaning results | Overloading, wrong detergent, incorrect program | Reduce load size, use correct detergent, select appropriate program |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in spray arms, unbalanced load | Check for foreign objects, redistribute load evenly |
| Dishes not drying | Rinse aid empty, wrong program selected | Refill rinse aid, select program with drying function |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Flooding detected - Check for leaks and water supply
- E04: Motor issue - Contact service center
- E05: Door not closed properly - Ensure door is fully closed
- E06: Temperature sensor issue - Contact service center
Manual Downloads
Current Model Manuals
SHP878WD5N
Built-in Dishwasher with Zeolith
SHP875WD5N
Built-in Dishwasher with Home Connect
SHP879WD5N
Built-in Dishwasher with CrystalDry
SHP878WD4N
Built-in Dishwasher Black
Popular Previous Models
SMS68L02EU
Built-in Dishwasher 14 Place
SMS88TI01E
Built-in Dishwasher with AutoOpen
SMI46KS01E
Built-in Dishwasher 13 Place
SMS50E32EU
Built-in Dishwasher 12 Place