Panel Specifications
| Model Number | SHV78B73UC |
| Product Type | Built-in Dishwasher |
| Panel Material | Stainless Steel Front |
| Overall Height | 33-7/8 inches (860 mm) |
| Overall Width | 23-5/8 inches (600 mm) |
| Overall Depth | 23-3/4 inches (603 mm) |
| Control Panel Height | 2-1/4 inches (57 mm) |
| Door Panel Thickness | 3/4 inch (19 mm) maximum |
| Weight | 97 lbs (44 kg) |
| Color Finish | Stainless Steel / Black |
Panel Construction Details
- Front Panel: Brushed stainless steel with hidden controls
- Control Interface: Fully integrated touch controls
- Handle Type: Recessed grip design
- Finish: Fingerprint-resistant coating
Installation Requirements
Tools Needed:
- Tape measure
- Level
- Power drill
- Screwdrivers (flat and Phillips)
- Adjustable wrench
- Pliers
Step-by-Step Installation
- Prepare Cabinet Opening: Ensure cabinet opening meets specified dimensions and is square and level.
- Check Clearances: Verify adequate space for water lines, drain hose, and electrical connection.
- Install Water Supply: Connect hot water supply line using only new braided stainless steel hoses.
- Connect Drain Hose: Route drain hose with high loop to prevent backflow into dishwasher.
- Electrical Connection: Connect to dedicated 120V, 15A circuit with proper grounding.
- Position Dishwasher: Slide unit into cabinet opening, ensuring proper alignment.
- Secure Installation: Use mounting brackets to secure dishwasher to adjacent cabinets.
- Level Adjustment: Adjust leveling feet to ensure unit is perfectly level.
- Test Operation: Run initial cycle to check for leaks and proper operation.
Cutout Dimensions
| Cabinet Opening Width | 23-5/8 inches (600 mm) minimum |
| Cabinet Opening Height | 34-1/2 inches (876 mm) minimum |
| Cabinet Opening Depth | 24 inches (610 mm) minimum |
| Countertop Overhang | 1 inch (25 mm) maximum |
| Side Clearance | 1/4 inch (6 mm) each side minimum |
| Floor to Countertop | 34-1/2 inches (876 mm) minimum |
Critical Measurements
- Minimum Cabinet Width: 23-5/8 inches (600 mm)
- Minimum Cabinet Depth: 24 inches (610 mm)
- Door Clearance: 2 inches (51 mm) minimum for full opening
- Ventilation Space: 1 inch (25 mm) top and sides recommended
Clearance Requirements
Front Clearance
Minimum 2 inches (51 mm) clearance required in front of dishwasher for door to open fully and allow access to controls and loading.
Side Clearance
Minimum 1/4 inch (6 mm) clearance on each side for proper installation and ventilation. Adjacent cabinets must not interfere with operation.
Top Clearance
Minimum 1 inch (25 mm) clearance above unit for ventilation and heat dissipation. Countertop must not rest directly on appliance.
Rear Clearance
Minimum 2 inches (51 mm) clearance at rear for water connections, drain hose, and electrical cord routing.
Floor Leveling
Floor must be level within 1/4 inch (6 mm) over entire area where dishwasher will be installed to ensure proper door operation.
Adjacent Appliances
Maintain minimum 2 inches (51 mm) clearance from ovens, refrigerators, or other heat-producing appliances.
Installation Warnings
Technical Downloads
Current Model Documentation
SHV78B73UC
Installation Manual & Panel Specifications
SHV78B73UC-TECH
Technical Service Manual
SHV78B73UC-DIM
Detailed Dimension Drawings
SHV78B73UC-WARR
Warranty Information
Related Models
SHV68B73UC
18-inch Panel Dimensions
SHV88B73UC
24-inch Panel Dimensions
SHV78C73UC
Custom Panel Options
SHV78A73UC
ADA Compliant Version