Installation Guide
Tools Needed:
- Adjustable spanner
- Spirit level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Water pressure gauge
Step-by-Step Installation
- Choose Installation Location: Select a location near kitchen plumbing and electrical connections on a solid, level floor with adequate ventilation.
- Remove Packaging Materials: Remove all transit bolts and protective packaging from the dishwasher.
- Connect Water Supply: Connect cold water supply line to the water inlet valve using approved UK plumbing fittings.
- Connect Waste Water Hose: Route the drain hose to a standpipe or sink waste with an air gap to prevent backflow.
- Electrical Connection: Connect to a properly grounded 230V, 50Hz, AC only outlet with appropriate UK plug. Must be installed by qualified electrician.
- Level the Dishwasher: Adjust the levelling feet to ensure the dishwasher is perfectly level from front to back and side to side.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | SPS4HWX52G |
| Type | Freestanding/Slimline Dishwasher |
| Colour | Stainless Steel / White |
| Place Settings | 10 place settings |
| Noise Level | 44 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9.5 litres per cycle |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 81.5 x 45 x 60 cm |
| Weight | 42 kg |
| Programmes | 6 programmes including Eco and Intensive |
Warranty Information
- Full Warranty: 2 years parts and labour
- Motor Warranty: 10 years on EcoSilence Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 0344 892 8979 or visit Bosch-home.co.uk
Key Features
EcoSilence Drive
Bosch's brushless EcoSilence Drive motor provides powerful yet quiet operation, ensuring long-lasting reliability and energy efficiency with minimal noise.
ActiveWater Technology
Intelligent water management system that automatically adjusts water consumption based on load size and soil level, saving water and energy.
VarioSpeed Plus
Reduces washing time by up to 50% while maintaining excellent cleaning results, perfect for when you need clean dishes in a hurry.
HygienePlus
Extra-hot final rinse at 70°C eliminates 99.9% of bacteria and germs, ensuring perfect hygiene for baby bottles and kitchen utensils.
Home Connect
Wi-Fi enabled for remote control via smartphone app, allowing you to start programmes, monitor progress and receive completion notifications.
InfoLight
Projects a red light onto the floor to show when the dishwasher is running, disappearing when the cycle is complete.
Cleaning Programmes Explained
Eco 50°C
Energy-efficient programme for normally soiled dishes, perfect for daily use
Intensive 70°C
Powerful cleaning for heavily soiled pots, pans and baking dishes
Auto 45-65°C
Automatic programme that adjusts temperature and duration based on soil level
Glass 40°C
Gentle programme for delicate glassware and crystal
Quick 65°C
Fast programme for lightly soiled dishes in just 30 minutes
Rinse
Short rinse cycle for dishes that will be washed later
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly, child lock activated | Check power supply, ensure door is latched completely, check child lock setting |
| Poor cleaning results | Overloading, wrong detergent, incorrect programme selection | Reduce load size, use recommended detergent, select appropriate programme |
| Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions, clean filter system |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check water connections |
| Unusual noises | Spray arm obstruction, crockery not loaded properly | Check spray arms can rotate freely, rearrange load |
| Error codes displayed | Various technical faults detected by system | Refer to error code list below, contact service if persistent |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Water leakage detected - Check for leaks and water supply
- E04: Heating system issue - Contact service centre
- E05: Door not closed properly - Ensure door is fully closed
- E09: Temperature sensor fault - Contact service centre
Manual Downloads
Current UK Models
SPS4HWX52G
10 Place Settings Slimline
SPS6ZCI01G
13 Place Settings Full Size
SMI4HMS02G
9 Place Settings Compact
SMU6ZCS01G
14 Place Settings Premium
Popular Previous UK Models
SMS50E32GC
12 Place Settings
SMV69M10GB
15 Place Settings
SPS40D02GB
9 Place Settings Slim
SMV88TD06G
16 Place Settings