Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Spirit level
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply and drainage on a solid, level floor with adequate ventilation.
- Remove Packaging Materials: Remove all transit packaging including foam blocks and protective tape from the dishwasher.
- Connect Water Supply: Connect cold water supply line to the water inlet valve. Use only new hoses and ensure proper sealing.
- Connect Drain Hose: Route the drain hose into sink waste pipe or standpipe with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 230V, 50Hz, AC only outlet. Ensure proper earthing.
- Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is perfectly level from front to back and side to side.
- Test Run: Run the dishwasher through a short cycle to check for leaks and proper operation before first use.
Specifications
| Model Series | SMS40C02GB |
| Type | Built-in Dishwasher |
| Color | Stainless Steel |
| Capacity | 14 Place Settings |
| Noise Level | 44 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9.5 Litres per cycle (Eco Program) |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
| Weight | 48.5 kg |
| Programs | 6 Programs + 4 Options |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoDirect Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 0344 892 8979 or visit Bosch-home.co.uk
Key Features
EcoDirect Motor
Bosch's innovative EcoDirect motor provides efficient and quiet operation with brushless technology, ensuring long-lasting performance and energy savings.
Home Connect
Wi-Fi enabled for remote control via smartphone app, allowing you to start cycles, monitor progress, and receive notifications when your dishes are clean.
VarioSpeed Plus
Reduces washing time by up to 60% while maintaining excellent cleaning results, perfect for when you need clean dishes in a hurry.
AquaSensor
Intelligent water sensor automatically detects how dirty the water is and adjusts water usage accordingly, saving water and energy with every cycle.
ExtraDry Function
Special drying function that uses higher temperatures to ensure your dishes, plastics and glassware come out completely dry and ready to use.
InfoLight
Projects a red light onto the floor to show the dishwasher is running, so you never have to open the door to check if the cycle has finished.
Wash Programs Explained
Auto
Automatically selects the optimal program based on soil level detected by AquaSensor
Eco 50°C
Energy-efficient program for normally soiled dishes, perfect for daily use
Intensive 70°C
High-temperature program for heavily soiled pots, pans and baking dishes
Glass 40°C
Gentle program for crystal and delicate glassware with special protection
Quick 65°C
Fast program for lightly soiled dishes, completes in just 30 minutes
Rinse
Quick rinse without detergent to prevent dried-on food residues
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly, child lock activated | Check power supply, ensure door is latched completely, check child lock |
| Poor cleaning results | Overloading, wrong detergent, incorrect program selection | Reduce load size, use correct detergent, select appropriate program |
| Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions, clean filter system |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Spray arm obstruction, foreign objects in pump | Check spray arms rotate freely, remove any foreign objects |
| Dishes not drying | Rinse aid empty, wrong program selected, overloading | Refill rinse aid, select ExtraDry program, reduce load size |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Heating issue - Check heating element and thermostat
- E04: Water leakage detected - Check for leaks and water supply
- E05: Door not closed properly - Ensure door is fully closed
- E09: Motor issue - Contact service center
Manual Downloads
Current Model Manuals
SMS40C02GB
14 Place Settings HE Dishwasher
SMS46JI01G
15 Place Settings Dishwasher
SMS4HVI00G
13 Place Settings Slimline
SMS50D02GB
14 Place Settings White
Popular Previous Models
SMS50E32GB
14 Place Settings
SMS53E22GB
13 Place Settings
SMS88TW01G
16 Place Settings
SMS25AW00G
12 Place Settings