Bosch SMS40C02GB HE

User Manual & Installation Guide

4 Place Settings Capacity

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Spirit level

Step-by-Step Installation

  1. Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor with adequate ventilation.
  2. Remove Packaging Materials: Remove all protective films and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect the water supply line to the water inlet valve. Use only new hoses and ensure tight connections.
  4. Connect Drain Hose: Route the drain hose into the sink waste pipe or standpipe with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 230V, 50Hz outlet. Ensure the dishwasher is properly earthed.
  6. Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is perfectly level from front to back and side to side.
  7. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number SMS40C02GB
Type Freestanding Dishwasher
Color White
Capacity 4 Place Settings
Noise Level 48 dB
Control Type Electronic Controls with Display
Energy Rating A++ (Highly Efficient)
Water Consumption 9.5 Litres per cycle
Power Requirements 230V, 50Hz, 10A
Dimensions (HxWxD) 85 x 60 x 60 cm
Weight 45 kg
Programs 6 Programs including Eco and Intensive

Warranty Information

  • Full Warranty: 2 years parts and labor
  • Additional Coverage: Optional extended warranty available
  • Service Network: Nationwide authorized service centers

For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com

Key Features

EcoSilence Drive

Bosch's innovative brushless motor technology provides quiet operation, energy efficiency, and long-lasting reliability with minimal vibration.

ActiveWater Technology

Intelligent water management system that automatically adjusts water consumption based on load size and soil level, saving water and energy.

VarioSpeed Plus

Reduces washing time by up to 60% while maintaining excellent cleaning results, perfect for when you need clean dishes quickly.

HygienePlus

Special program that uses higher temperatures to eliminate 99.9% of bacteria and germs, ideal for baby bottles and kitchen utensils.

InfoLight

Projects a red light onto the floor to indicate when the dishwasher is running, providing convenient status information at a glance.

AquaStop

Complete protection against water damage with leak protection in the base pan and supply hose, giving you peace of mind.

Washing Programs Explained

Eco 50°C

Energy-efficient program for normally soiled dishes, combining excellent cleaning with low energy consumption

Intensive 70°C

High-temperature program for heavily soiled pots, pans, and baking dishes with baked-on food residues

Auto 45-65°C

Automatic program that adjusts temperature and duration based on soil level detected by the AquaSensor

Quick 65°C

Fast program for lightly soiled dishes that need to be cleaned quickly, perfect for everyday use

Glass 40°C

Gentle program for delicate glassware and crystal, using lower temperature and reduced water pressure

Hygiene 70°C

Special hygiene program that eliminates germs and bacteria, ideal for baby feeding equipment

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, child lock activated Check power supply, ensure door is latched completely, check child lock status
Poor cleaning results Overloading, wrong detergent, incorrect program selection Reduce load size, use correct dishwasher detergent, select appropriate program
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose for obstructions, clean the filter system
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check water connections
Unusual noises Foreign objects in spray arms, unbalanced load Check for foreign objects in spray arms, redistribute load evenly
Dishes not drying properly Rinse aid empty, incorrect program selection Refill rinse aid, select program with drying function

Error Codes

  • E01: Water supply issue - Check water supply and inlet valve
  • E02: Drain issue - Check drain hose and pump
  • E03: Water leakage detected - Check for leaks and water supply
  • E04: Heating issue - Contact service center
  • E05: Door not closed properly - Ensure door is fully closed
  • E06: Temperature sensor issue - Contact service center

Manual Downloads

Current Model Manuals

SMS40C02GB

4 Place Settings Dishwasher

SMS45IW02G

4 Place Settings Integrated

SMS46IW01G

4 Place Settings SilencePlus

SMS44DI00G

4 Place Settings White

Popular Previous Models

SMS40D02GB

4 Place Settings Eco

SMS42G02GB

4 Place Settings Compact

SMS46JI01G

4 Place Settings Pro

SMS43L02GB

4 Place Settings Basic

Note: For models not listed here, please visit the Bosch Support Website for complete documentation.