Bosch SMS40C02GB Heat Settings

User Manual & Temperature Guide

Built-in Dishwasher

Heat Settings Guide

Temperature Ranges:

  • Eco Program: 45-50°C
  • Auto Program: 45-65°C
  • Normal Program: 65°C
  • Intensive Program: 70°C
  • Quick Program: 45°C
  • Glass Program: 40°C

Step-by-Step Temperature Selection

  1. Select Program: Choose the appropriate washing program based on load type and soil level.
  2. Temperature Adjustment: Press the temperature button to cycle through available heat settings for the selected program.
  3. Confirm Selection: The display will show the selected temperature. Wait 3 seconds for automatic confirmation.
  4. Energy Saving Tips: Use lower temperatures (45-50°C) for lightly soiled dishes to save energy.
  5. Hygiene Settings: For sanitization, select programs with 65°C or higher temperatures.
  6. Glass Care: Always use 40°C setting for delicate glassware and crystal.
  7. Start Cycle: Press start button to begin the selected program with chosen temperature.
Warning: Higher temperatures may cause damage to plastic items and delicate materials. Always check manufacturer's recommendations for dishwasher-safe items.

Specifications

Model Number SMS40C02GB
Type Built-in Dishwasher
Color Stainless Steel
Place Settings 12 Place Settings
Noise Level 48 dB
Control Type Electronic Controls with Display
Energy Rating A+++
Water Consumption 9.5 Litres per cycle
Power Requirements 230V, 50Hz
Dimensions (HxWxD) 81.5 x 59.8 x 55 cm
Weight 42.5 kg
Max Temperature 70°C

Warranty Information

  • Full Warranty: 2 years parts and labor
  • Motor Warranty: 10 years on motor
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Bosch Customer Service at 0344 892 8979 or visit Bosch-home.co.uk

Washing Programs

Eco Program

Energy-efficient program operating at 45-50°C, perfect for normally soiled dishes with reduced energy and water consumption.

Auto Program

Intelligent program that automatically adjusts temperature between 45-65°C based on soil level detected by aqua sensor.

Intensive Program

High-temperature program at 70°C for heavily soiled pots, pans, and baking sheets requiring intensive cleaning.

Normal Program

Standard daily program operating at 65°C for regular dishwashing needs with balanced performance and efficiency.

Quick Program

Fast program at 45°C for lightly soiled dishes that need to be washed quickly, completing in approximately 30 minutes.

Glass Program

Gentle program at 40°C specifically designed for delicate glassware, crystal, and fine china protection.

Temperature Settings Explained

40°C Glass Care

Gentle temperature for delicate items, prevents clouding and damage

45°C Eco/Quick

Energy-saving temperature for light soils and quick washes

50°C Auto Range

Medium temperature for normal daily cleaning with good efficiency

65°C Normal/Auto

Standard cleaning temperature for thorough daily washing

70°C Intensive

High temperature for sanitization and heavy soil removal

Rinse Only

Cold water rinse for interim rinsing without detergent

Troubleshooting

Problem Possible Cause Solution
Dishes not drying properly Low temperature setting, rinse aid empty Use higher temperature programs, refill rinse aid
Poor cleaning results Wrong temperature, overloaded, wrong detergent Select higher temperature, reduce load, use correct detergent
Water not heating Heating element fault, temperature sensor issue Check error codes, contact service technician
Program takes too long Eco program selected, high soil level Eco programs are longer by design, use Quick program for faster results
Error code displayed Various system faults Refer to error code list in manual, reset appliance
Detergent not dissolving Water temperature too low, detergent dispenser clogged Use higher temperature programs, clean detergent dispenser

Error Codes

  • E01: Water supply issue - Check water inlet and pressure
  • E02: Drainage issue - Check drain hose and filter
  • E03: Heating system fault - Contact service center
  • E04: Temperature sensor error - Reset appliance
  • E05: Water leakage detected - Check seals and connections
  • E09: Electronic control fault - Disconnect power for 5 minutes

Manual Downloads

Current Model Manuals

SMS40C02GB

12 Place Settings Dishwasher

SMS46GI02G

14 Place Settings Dishwasher

SMS88TW02G

16 Place Settings Dishwasher

SMS25AW01G

10 Place Settings Dishwasher

Popular Previous Models

SMS50E32GC

12 Place Settings

SMS53L12GC

13 Place Settings

SMS63L02GC

12 Place Settings

SMS40D02GB

12 Place Settings

Note: For models not listed here, please visit the Bosch Support Website for complete documentation.