Installation Guide
Tools Needed:
- Adjustable wrench
- Spirit level
- Screwdrivers (flat and Phillips)
- Pipe cutter
- Tape measure
- Sealant gun
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply, drainage, and electrical connections under a countertop.
- Remove Packaging Materials: Remove all protective films and shipping materials from the dishwasher.
- Connect Water Supply: Connect the water inlet hose to the cold water supply using appropriate fittings.
- Connect Drain Hose: Route the drain hose to the sink waste pipe or separate drainage system with proper height requirements.
- Electrical Connection: Connect to a properly grounded 230V, 50Hz outlet. Ensure separate circuit protection.
- Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is perfectly level for optimal performance.
- Secure Installation: Secure the dishwasher to the adjacent cabinets using the provided mounting brackets.
- Test Run: Run the dishwasher through a short cycle to check for leaks and proper operation.
Specifications
Model Number | SMS40C02GB |
Type | Built-in Dishwasher |
Color | Stainless Steel |
Place Settings | 12 Place Settings |
Noise Level | 48 dB |
Control Type | Electronic Controls with Display |
Energy Rating | A++ (Energy Efficient) |
Water Consumption | 9.5 Litres per cycle |
Power Consumption | 0.94 kWh per cycle |
Power Requirements | 230-240V, 50Hz, 10A |
Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
Weight | 42.5 kg |
Heating System | Condensation Drying with Heat Exchanger |
Warranty Information
- Full Warranty: 2 years parts and labor
- Heating Element Warranty: 5 years on heating system
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 0344 892 8979 or visit Bosch-home.co.uk
Key Features
EcoSilence Drive
Brushless motor technology provides quiet operation, energy efficiency, and long-lasting reliability with minimal maintenance requirements.
ActiveWater Technology
Intelligent water management system that automatically adjusts water consumption based on load size and soil level for optimal cleaning efficiency.
VarioSpeed
Reduces washing time by up to 65% while maintaining excellent cleaning results, perfect for when you need dishes cleaned quickly.
Heat Exchanger Technology
Advanced condensation drying system that uses residual heat for efficient drying while being gentle on plastic items and energy efficient.
InfoLight
Projects a red beam onto the floor to indicate when the dishwasher is running, providing clear status information without opening the door.
AquaStop
Complete protection against water damage with double security system including leak protection hose and base pan with float switch.
Washing Programs Explained
Auto
Intelligent program that automatically detects soil level and adjusts water temperature and duration accordingly
Eco 50°C
Energy-efficient program for normally soiled dishes, optimized for low energy and water consumption
Intensive 70°C
High-temperature program for heavily soiled pots, pans, and baking dishes with tough, dried-on food
Quick 65°C
Fast program for lightly soiled dishes that need to be cleaned quickly, using higher temperature for speed
Glass 40°C
Gentle program for delicate glassware and fine china with lower temperature and reduced mechanical action
Rinse
Short rinse program for dishes that will be washed later or to remove light food residues
Troubleshooting
Problem | Possible Cause | Solution |
---|---|---|
Dishwasher won't start | Power issue, door not closed properly, child lock activated | Check power supply, ensure door is latched completely, check child lock settings |
Poor cleaning results | Overloading, wrong detergent, incorrect program selection | Reduce load size, use recommended detergent, select appropriate program |
Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions, clean filter system |
Water leakage | Door not sealed properly, overfilling, loose connections | Check door seal, ensure proper loading, check water connections |
Unusual noises | Spray arm obstruction, improper loading, foreign objects | Check spray arms rotate freely, reload dishes properly, remove foreign objects |
Dishes not drying properly | Rinse aid empty, incorrect program, overloading | Refill rinse aid, use appropriate drying program, reduce load size |
Error Codes
- E01 / E02: Water supply issue - Check water supply and inlet valve
- E03 / E04: Drainage issue - Check drain hose and pump
- E09: Water leakage detected - Check for leaks and water supply system
- E15 / E16: Heating system issue - Contact service center
- E21 / E22: Temperature sensor fault - Contact service center
- E24: Door not closed properly - Ensure door is fully closed and latched
Manual Downloads
Current Model Manuals
SMS40C02GB
12 Place Settings Built-in
SMS46GI01G
14 Place Settings Built-in
SMS88TW01G
16 Place Settings Built-in
SMS25AW01G
10 Place Settings Built-in
Popular Previous Models
SMS50E32GC
12 Place Settings
SMS53L12GC
13 Place Settings
SMS69T02GC
14 Place Settings
SMS24AW01G
9 Place Settings