Bosch SMS40C02GB Heating Replacement

Service Manual & Installation Guide

Heating Element Replacement

Installation Guide

Tools Needed:

  • Phillips screwdriver
  • Flat-head screwdriver
  • Multimeter
  • Wire strippers
  • Safety gloves
  • Insulation resistance tester

Step-by-Step Heating Element Replacement

  1. Safety First: Disconnect the dishwasher from power supply and turn off water supply.
  2. Access the Heating Element: Remove the lower rack and spray arm to access the heating element area.
  3. Remove Old Element: Disconnect electrical connections and remove mounting screws holding the heating element.
  4. Install New Element: Position the new heating element and secure with mounting screws.
  5. Electrical Connections: Reconnect all electrical wires according to the wiring diagram.
  6. Test Installation: Use a multimeter to check for proper resistance and insulation.
  7. Final Check: Reassemble all components and run a test cycle to verify proper operation.
Warning: Always disconnect power before servicing. Heating element replacement should be performed by qualified technicians to ensure safety and maintain warranty coverage.

Specifications

Model Number SMS40C02GB
Product Type Built-in Dishwasher
Heating Element Type Stainless Steel Sheathed
Power Rating 1800-2000W
Voltage 220-240V AC
Resistance Value 25-30 Ohms (at room temperature)
Temperature Range Up to 70°C
Dimensions Standard 60cm width
Compatible Parts 00611947, 00644237

Warranty Information

  • Original Part Warranty: 2 years
  • Labor Warranty: 90 days when installed by authorized technician
  • Compatibility: Genuine Bosch replacement part

For warranty service, contact Bosch Customer Service at 0344 892 8979 or visit Bosch-home.co.uk

Key Features

Stainless Steel Construction

High-quality stainless steel sheathing provides excellent corrosion resistance and long-lasting durability in harsh dishwasher environments.

Precise Temperature Control

Advanced heating technology ensures accurate water temperature control for optimal cleaning performance and energy efficiency.

Quick Heating

Rapid heat-up time reduces cycle duration while maintaining consistent temperature throughout the washing process.

Energy Efficient

Designed for maximum heat transfer efficiency, reducing energy consumption while maintaining excellent cleaning results.

Easy Installation

Standardized connections and mounting system allows for straightforward replacement with basic tools.

Safety Features

Built-in thermal protection and proper insulation ensure safe operation and prevent overheating situations.

Technical Specifications

Electrical Rating

220-240V AC, 50Hz, 1800-2000W power consumption

Material

Stainless steel sheath with magnesium oxide insulation

Connection Type

Standard spade terminals for secure electrical connection

Temperature Sensor

Integrated NTC thermistor for precise temperature monitoring

Mounting

Standard flange mounting with silicone gasket seal

Compliance

CE certified and meets all European safety standards

Troubleshooting

Problem Possible Cause Solution
Dishwasher not heating water Failed heating element, thermal fuse, wiring issue Test heating element resistance, check thermal fuse, inspect wiring
Inconsistent water temperature Faulty temperature sensor, failing heating element Replace temperature sensor, test heating element performance
Error code E15 Heating system fault, temperature not reached Check heating element, temperature sensor, and control board
Tripping circuit breaker Short circuit in heating element, insulation failure Test for ground faults, replace damaged heating element
Slow heating Limescale buildup, failing heating element Descale heating element, test element performance
No power to heating element Control board failure, relay issue, wiring problem Check control board output, test relays, inspect wiring harness

Error Codes

  • E09: Water heating timeout - Check heating element and temperature sensor
  • E15: Heating system fault - Verify heating element operation
  • E16: Temperature sensor fault - Replace NTC temperature sensor
  • E24: Overheating protection - Check for restricted water flow
  • E25: Heating element short circuit - Replace heating element
  • E67: Communication error - Check wiring to heating system

Manual Downloads

Current Model Manuals

SMS40C02GB

Heating Element Replacement Guide

SMS46GI01G

Heating System Service Manual

SMS53L12GB

Thermal System Repair Guide

SMS88TW01G

Heating Element Installation

Popular Related Models

SMS25AW01G

Compact Dishwasher Heating

SMS68L08GB

Heat Exchange System

SMS44DI00G

Heating Element Service

SMS88TW02G

Thermal Protection System

Note: For models not listed here, please visit the Bosch Service Website for complete documentation and technical support.