Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Drill with bits
Step-by-Step Installation
- Choose Installation Location: Select a location in your kitchen cabinetry with access to water supply, drain, and electrical connections.
- Prepare Cabinet Opening: Ensure the cabinet opening meets the required dimensions (60cm width, 82-85cm height, 55cm depth).
- Connect Water Supply: Connect the water inlet hose to the cold water supply using a 3/4" connector. Ensure connections are tight.
- Connect Drain Hose: Route the drain hose to the sink drain or waste pipe with a minimum height of 40cm to prevent backflow.
- Electrical Connection: Connect to a properly grounded 230V, 50Hz outlet. Use a dedicated circuit if possible.
- Secure Dishwasher: Secure the dishwasher to the adjacent cabinets using the provided mounting brackets.
- Install Door Panel: Attach your custom door panel following the manufacturer's instructions for proper alignment.
- Test Run: Run the dishwasher through a short cycle to check for leaks and proper operation.
Specifications
Model Number | SMV6ZCX10G |
Type | Built-In Dishwasher |
Color | Stainless Steel |
Place Settings | 14 |
Noise Level | 44 dB |
Control Type | Touch Controls with LED Display |
Energy Rating | A+++ (Most Efficient) |
Water Consumption | 9.5 L per cycle (Eco program) |
Power Consumption | 0.78 kWh per cycle (Eco program) |
Power Requirements | 230V, 50Hz, 10A |
Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
Weight | 32.5 kg |
Drying System | Zeolith® Mineral Drying |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoDirect Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com
Key Features
Zeolith® Drying Technology
Bosch's innovative mineral drying system uses natural zeolith minerals to absorb moisture and release heat, providing superior drying results with energy efficiency.
EcoDirect Motor
The brushless EcoDirect motor provides powerful and efficient water circulation while operating quietly and reliably with minimal energy consumption.
Home Connect
Wi-Fi enabled for remote control via smartphone app, allowing you to start cycles, monitor progress, receive notifications, and download new programs.
AquaSensor
Intelligent water sensor automatically detects the level of soiling and adjusts water usage accordingly, saving water and energy while ensuring perfect cleaning.
VarioDrawer
Flexible third rack provides additional space for cutlery and utensils, maximizing loading capacity and organization.
InfoLight
Projects a red light onto the floor to indicate when the dishwasher is running, providing clear status information without opening the door.
Cleaning Programs
Auto Program
Automatically adjusts time, temperature and water usage based on soil level detection
Eco Program
Energy-efficient program for normally soiled dishes, perfect for daily use
Intensive Program
High-temperature program for heavily soiled pots, pans and baking dishes
Quick Program
Fast 60-minute program for lightly soiled dishes that need quick cleaning
Glass Program
Gentle program for delicate glassware and crystal at reduced temperature
Night Program
Extra quiet program designed for overnight operation
Troubleshooting
Problem | Possible Cause | Solution |
---|---|---|
Dishwasher won't start | Power issue, door not closed properly, child lock activated | Check power supply, ensure door is latched completely, deactivate child lock |
Poor cleaning results | Overloading, wrong detergent, incorrect program selection | Reduce load size, use recommended detergent, select appropriate program |
Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions, clean filter system |
Leaking water | Door not sealed properly, overfilling, loose connections | Check door seal, ensure proper detergent amount, check water connections |
Unusual noises | Spray arm obstruction, foreign objects in pump | Check spray arms for obstructions, remove any foreign objects |
Dishes not drying properly | Rinse aid empty, incorrect loading, selected program without drying | Refill rinse aid, ensure proper loading, select program with drying |
Error Codes
- E01 / E02: Water supply issue - Check water supply and inlet valve
- E09 / E10: Drain issue - Check drain hose and pump
- E15 / E16: Water leakage detected - Check for leaks and water supply
- E21 / E22: Heating system issue - Contact service center
- E24: Door not closed properly - Ensure door is fully closed
- E25: Temperature sensor issue - Contact service center
Manual Downloads
Current Model Manuals
SMV6ZCX10G
14 Place Settings with Zeolith
SMV6ZCX06G
14 Place Settings Built-In
SMV6ZCX18G
14 Place Settings Home Connect
SMV6ZCX12G
14 Place Settings Stainless Steel
Popular Previous Models
SMV69T06EU
14 Place Settings SilencePlus
SMV68TX06E
13 Place Settings Built-In
SMI69T05EU
14 Place Settings Integrated
SMV59T10EU
12 Place Settings Built-In