Manual for Bosch SHP78CM5N

User Manual & Installation Guide

Built-in Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure
  • Drill

Step-by-Step Installation

  1. Choose Installation Location: Select a location under countertop with access to water supply, drain, and electrical connections.
  2. Remove Packaging Materials: Remove all shipping materials and protective films from the dishwasher.
  3. Connect Water Supply: Connect cold water supply line to the water inlet valve. Use only new hoses and ensure tight connections.
  4. Connect Drain Hose: Route the drain hose to sink drain or garbage disposal with proper high loop installation.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Dedicated circuit recommended.
  6. Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series SHP78CM5N
Type Built-in Dishwasher
Color Stainless Steel
Place Settings 15 place settings
Noise Level 42 dB
Control Type Electronic Touch Controls with Display
Energy Rating A+++ (Most Efficient)
Water Consumption 9.5 liters per cycle (Eco program)
Power Requirements 230V, 50Hz, 10A
Dimensions (HxWxD) 81.5 x 59.8 x 55 cm
Weight 48.5 kg
Drying System Zeolith® mineral drying

Warranty Information

  • Full Warranty: 2 years parts and labor
  • Motor Warranty: 10 years on motor
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com

Key Features

Zeolith® Drying Technology

Bosch's innovative Zeolith mineral drying system uses natural minerals to absorb moisture and release heat, resulting in perfectly dry dishes with no additional energy consumption.

EcoSilence Drive

The brushless EcoSilence Drive motor provides powerful yet quiet operation with long-lasting reliability and energy efficiency.

PerfectDry

Advanced drying system that automatically adjusts drying temperature and time based on load size and soil level for optimal results.

Home Connect

Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts.

AquaStop

Complete water protection system with double-walled hoses and automatic leak detection for peace of mind and home safety.

VarioSpeed Plus

This feature reduces cycle time by up to 60% while maintaining excellent cleaning performance through optimized water pressure and temperature.

Wash Programs Explained

Auto

Automatically detects soil level and adjusts water temperature and cycle time accordingly

Eco

Energy-efficient program for normally soiled dishes, perfect for daily use

Intensive

High-temperature program for heavily soiled pots, pans, and baking dishes

Quick

Short program for lightly soiled dishes that need to be cleaned quickly

Glass

Gentle program for crystal and delicate glassware with lower temperature

Rinse

Quick rinse cycle to prevent food from drying on dishes before full wash

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, incorrect program Reduce load size, use correct detergent, select appropriate program
Water not draining Drain hose clogged or kinked Check drain hose for obstructions or kinks, clean filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, unbalanced load Check for foreign objects, redistribute load evenly
Dishes not drying Rinse aid empty, wrong program selected Refill rinse aid, select program with drying function

Error Codes

  • E01: Water supply issue - Check water supply and inlet valve
  • E02: Drain issue - Check drain hose and pump
  • E03: Water leakage detected - Check for leaks and water supply
  • E04: Heating issue - Contact service center
  • E05: Door not closed properly - Ensure door is fully closed
  • E09: Sensor error - Contact service center

Manual Downloads

Current Model Manuals

SHP78CM5N

Built-in Dishwasher with Zeolith

SHP75CM5N

Built-in Dishwasher

SHP79CM5N

Built-in Dishwasher with Home Connect

SHP78CM3N

Built-in Dishwasher Stainless Steel

Popular Previous Models

SHP68CM5N

Built-in Dishwasher

SHP65CM5N

Built-in Dishwasher

SHP87CM5N

Built-in Dishwasher

SHP53CM5N

Built-in Dishwasher

Note: For models not listed here, please visit the Bosch Support Website for complete documentation.