Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Water pressure gauge
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections with proper ventilation.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and ensure proper water pressure (20-120 psi).
- Connect Drain Hose: Route the drain hose into sink drain or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Dedicated circuit recommended.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | SHX89PW55N |
| Type | Built-in Dishwasher |
| Color | Stainless Steel / White |
| Place Settings | 16 Place Settings |
| Noise Level | 42 dB |
| Control Type | Hidden Touch Controls with LED Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9.5 L/cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 84.5 x 59.8 x 57 cm |
| Weight | 52 kg |
| Drying System | Zeolith® Mineral Drying |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoSilence Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com
Key Features
EcoSilence Drive
Bosch's brushless motor technology provides ultra-quiet operation at only 42 dB, equivalent to library-level quietness, with enhanced reliability and energy efficiency.
Zeolith® Drying
Revolutionary mineral drying system uses natural zeolite minerals to absorb moisture and release heat, providing superior drying results with energy efficiency.
PerfectDry
Advanced drying system with mineral technology and automatic door opening at the end of the cycle to release steam and improve drying performance.
Home Connect
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts.
AquaStop Plus
Complete water protection system with double-layered hose and leak sensor that automatically shuts off water supply in case of leaks.
RackMatic
Third rack system with adjustable height positions to accommodate taller items while maximizing loading capacity and flexibility.
Wash Programs Explained
Auto Program
Automatically detects soil level and adjusts water temperature and cycle time for optimal cleaning
Intensive 70°C
High-temperature wash for heavily soiled pots, pans, and baking dishes
Eco 50°C
Energy-efficient program for normally soiled dishes with reduced water and energy consumption
Quick 60°C
Fast 30-minute cycle for lightly soiled dishes that need quick cleaning
Glass 40°C
Gentle program for crystal and delicate glassware with special protection
Night Program
Extra quiet operation with reduced noise for overnight cleaning
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly, child lock activated | Check power supply, ensure door is latched completely, deactivate child lock |
| Poor cleaning results | Overloading, wrong detergent, incorrect program, clogged spray arms | Reduce load size, use correct detergent, select appropriate program, clean spray arms |
| Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions or kinks, clean filter system |
| Leaking water | Door not sealed, overfilling, loose connections, worn door gasket | Check door seal, ensure proper detergent amount, check connections, replace gasket |
| Unusual noises | Foreign objects in pump, spray arm hitting dishes, worn motor bearings | Check for foreign objects, rearrange dishes properly, contact service |
| Dishes not drying | Rinse aid empty, wrong program selected, wet load added | Refill rinse aid, select drying program, ensure dishes are not dripping wet |
Error Codes
- E01 / E02: Water supply issue - Check water supply and inlet valve
- E03 / E04: Drain issue - Check drain hose and pump
- E09: Flooding detected - Check for leaks and water supply
- E15 / E16: Heating issue - Check heating element and temperature sensor
- E21 / E22: Motor issue - Contact service center
- E24: Door not closed properly - Ensure door is fully closed
Manual Downloads
Current Model Manuals
SHX89PW55N
800 Series Dishwasher
SHX88PW55N
800 Series Dishwasher
SHX87PW55N
800 Series Dishwasher
SHX86PW55N
800 Series Dishwasher
Popular Previous Models
SHX68TL5UC
500 Series Dishwasher
SHX45TL5UC
300 Series Dishwasher
SHS63VL5UC
100 Series Dishwasher
SHS46VL5UC
100 Series Dishwasher