Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Drill with bits
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply, drain, and electrical connections with adequate ventilation.
- Remove Packaging Materials: Remove all shipping materials and protective films from the dishwasher.
- Connect Water Supply: Connect the water supply line to the hot water inlet valve. Use only new hoses and ensure tight connections.
- Connect Drain Hose: Route the drain hose to the sink drain or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Dedicated circuit recommended.
- Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is perfectly level from front to back and side to side.
- Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
- Test Run: Run the dishwasher through a short cycle to check for leaks and proper operation.
Specifications
| Model Series | SMS48IW00E |
| Type | Built-in Dishwasher |
| Color | Stainless Steel / Black |
| Capacity | 14 Place Settings |
| Noise Level | 44 dB (Extra Quiet) |
| Control Type | Electronic Touch Controls with LED Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9.5 Liters per cycle (Eco program) |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 81.5 x 59.8 x 55 cm |
| Weight | 47.5 kg |
| Drying System | Zeolith® Mineral Drying |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on EcoSilence Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Bosch Customer Service at 1-800-944-2904 or visit Bosch-home.com
Key Features
EcoSilence Drive
Brushless motor technology provides extremely quiet operation (44 dB) with enhanced reliability and energy efficiency for long-lasting performance.
Zeolith® Drying
Revolutionary mineral drying system uses natural zeolite minerals to absorb moisture and release heat, providing excellent drying results while saving energy.
VarioSpeed Plus
Reduces cycle time by up to 50% while maintaining excellent cleaning results, perfect for when you need dishes cleaned quickly.
AquaSensor
Intelligent water sensor automatically detects how dirty the water is and adjusts water usage accordingly, saving water and energy.
Home Connect
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts.
Rackmatic®
Adjustable upper rack with 9 different height settings to accommodate tall items like wine glasses and large pots in the lower rack.
Cleaning Programs Explained
Auto
Automatically selects optimal program based on soil level detected by AquaSensor
Eco
Energy-efficient program for normally soiled dishes, perfect for daily use
Intensive
Powerful cleaning for heavily soiled pots, pans, and baking dishes
Glass
Gentle program for delicate glassware and crystal at lower temperatures
SpeedPerfect
Fast program that cleans dishes in just 30 minutes
Hygiene
High-temperature program that eliminates 99.9% of bacteria and germs
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor cleaning results | Overloading, wrong detergent, incorrect program | Reduce load size, use correct detergent, select appropriate program |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Spray arm obstruction, foreign objects in pump | Check spray arms rotate freely, remove any foreign objects |
| Dishes not drying | Rinse aid empty, wrong program selected | Refill rinse aid, select program with drying function |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Water leakage detected - Check for leaks and water supply
- E09: Motor issue - Contact service center
- E15: Temperature sensor error - Contact service center
- E24: Door not closed properly - Ensure door is fully closed
Manual Downloads
Current Model Manuals
SMS48IW00E
Silence Plus 48 Built-in
SMS46IW00E
Silence Plus 46 Built-in
SMS50IW00E
Silence Plus 50 Built-in
SMS53IW00E
Silence Plus 53 Built-in
Popular Previous Models
SMS45IW00E
Silence Plus 45 Built-in
SMS40IW00E
Silence Plus 40 Built-in
SMS88TW01E
8 Series Built-in
SMS25AW01E
2 Series Built-in